Salve qualcuno e' riuscito a far funzionare compiz in mepis in pc dotati di schede grafiche intel chip 965 serie x3000 ??

Nel mio caso sono portatili in cui gira Vista Microsoft (perdonatemi se lo nomino), gira bene compiz di linux mint per esempio ma mepis 7 riconosce la scheda solo come vesa e compiz non parte.

Grazie a tutti Roberto

allego xorg.conf generato in fase di installazione


Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
#Screen 0 "ATIScreen" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
#Option "Xinerama" "true"
#Option "Clone" "true"
InputDevice "Keyboard0" "CoreKeyboard"
#InputDevice "PS/2 Mouse" "CorePointer"
InputDevice "USB Mouse" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
#InputDevice "ALPS Touchpad" "SendCoreEvents"
#InputDevice "Appletouch" "SendCoreEvents"
#InputDevice "Stylus" "SendCoreEvents"
#InputDevice "Eraser" "SendCoreEvents"
#InputDevice "Cursor" "SendCoreEvents"
#InputDevice "Serial Mouse" "CorePointer"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection

Section "Files"
# Xorg 7.0 font paths
FontPath "/usr/share/fonts/X11/100dpi:unscaled"
FontPath "/usr/share/fonts/X11/misc:unscaled"

# Other font paths
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/kochi"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"

# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"

EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "v4l"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XKbOptions" ""
EndSection

Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection

Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection

Section "InputDevice"
Driver "synaptics"
Identifier "ALPS Touchpad"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "event"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.25"
Option "MaxSpeed" "0.50"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
EndSection

Section "InputDevice"
Identifier "Appletouch"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "100"
Option "RightEdge" "1120"
Option "TopEdge" "50"
Option "BottomEdge" "310"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapMove" "220"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "MinSpeed" "0.79"
Option "MaxSpeed" "0.88"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection

Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom eraser
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom cursor (mouse)
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Relative"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
Endsection

Section "Monitor"
Identifier "Monitor0"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-75
VertRefresh 55-70

EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-75
VertRefresh 55-70
EndSection

Section "Monitor"
Identifier "ATIMonitor"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-75
VertRefresh 55-70
EndSection

Section "Device"
Identifier "Card0"
Driver "vesa"
BoardName "unknown"

Screen 0
#Option "UseDisplayDevice" "dfp"
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Option "UseInternalAGPGART" "no"

# savage special options, use with care
#Option "NoUseBios"
#Option "BusType" "PCI"
Option "DmaMode" "None"

# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "true"
Option "UseEDID" "true"
Option "AddARGBGLXVisuals" "true"
Option "RenderAccel" "true"
#Option "AllowGLXWithComposite" "true"
EndSection

Section "Device"
Identifier "Card1"
Driver "vesa"
BoardName "unknown"

Screen 1
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16

SubSection "Display"
Depth 8
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection

# Only the official NVIDIA driver supports twinview
# these setting are an example
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-75"
Option "SecondMonitorVertRefresh" "55-70"
#Option "MetaModes" "1024x768, 1024x768"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultColorDepth 16

SubSection "Display"
Depth 8
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
EndSection

Section "Screen"
Identifier "ATIScreen"
Device "Card0"
Monitor "ATIMonitor"
DefaultColorDepth 24

SubSection "Display"
Depth 24
Modes "1280x800" "1280x768" "1024x768" "800x600"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

non sei l'unico ad avere problemi con la tua scheda e mepis, purtoppo i driver rilasciati da intel richiedono kernel-2.6.24.1 o superiori , motivo per il quale con ubuntu hardy e derivate il problema non si pone.
Upgradare da simply-etch a simply-lenny.